Filter
Top Products
VRX633R 33
English
Owner’s manual
Setting the TV area
∗ This function is enabled only when the panel is
open.
When you select the TV area (TV reception area),
the TV tuner area setting changes.
1. Press the ADJ button £ to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to move the cursor to “TV AREA” and
press the ENT at the center of the JOYSTICK
§ to display a list of country name.
3. Operate the JOYSTICK § upward or down-
ward to select a desired country. Then press
the ENT at the center of the JOYSTICK § to
set it.
4. When the setting is finished, operate the JOY-
STICK § rightward or leftward to move the
cursor “MENU”. Then press the ENT at the
center of the JOYSTICK § to return to the
adjustment selection display.
Setting the TV diver
∗ This function is enabled only when the panel is
open.
∗ Normally use the TV diver with the “ON” position.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the ADJ button £ to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select “TV DIVER”.
3. Operate the JOYSTICK § rightward or left-
ward to select “ON” or “OFF” and press the
ENT at the center of the JOYSTICK § to set
the selected reception setting.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the ADJ button £ to return to the pre-
vious mode.
TV Operations
Adjusting the brightness and tone
of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
1. Press the BND button % to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select the option “MONI ADJ” (by mov-
ing the cursor).
3. Press the ENT at the center of the JOYSTICK
§.
4. Operate the JOYSTICK § rightward or left-
ward to select “BRIGHT”,“COLOR” or “HUE”
(by moving the cursor).
● “BRIGHT“:
Adjust the brightness of the display.
● “COLOR“:
Adjusts the color saturation.
● “HUE“:
Adjusts the tone of color (red is emphasized
or green is emphasized.)
5. Operate the JOYSTICK § upward or down-
ward to adjust a level.
6. When the adjustment is made, operate the
JOYSTICK § rightward or leftward to move
the cursor to “MENU”. Then press the ENT at
the center of the JOYSTICK § to return to
the adjustment selection display.