Filter
Top Products
36 VRX633R
English
Owner’s manual
Digital Radio/DAB Operations
Information select
This function allows selecting a type of INFOR-
MATION on INFORMATION interrupt mode. You
can set any of the 6 types of INFO below:
TRAFFIC, WARNING, NEWS INFO, WEATHER,
EVENTS, SP. EVENT
∗ This function is enabled only when the panel is
open.
1. Press the ADJ button £.
2. Operate the JOYSTICK § upward or down-
ward to select “INFO SEL”. Press the ENT at
the center of the JOYSTICK § to change into
the INFO selecting display.
3. Operate the JOYSTICK § upward or down-
ward to select a desired INFORMATION. “ON”
and “OFF” items are displayed to the right.
4. Operate the JOYSTICK § rightward or left-
ward to select “ON” and press the ENT at the
center of the JOYSTICK § to set it.
5. When the setting is finished, operate the JOY-
STICK § rightward or leftward to move the
cursor to the “MENU”. Then press the ENT at
the center of the JOYSTICK § to return to
the adjustment display.
PTY
This function enables you to listen to the selected
programmes type, irrespective of the function
mode.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ DAB and RDS have the same PTY.
∗ You can select one PTY from DAB or RDS.
∗ PTY broadcast are not yet available in all coun-
tries.
∗ In INFO standby mode, INFO stations have prior-
ity over PTY stations.
∗ In TA standby mode, TP stations have priority over
PTY broadcasting station.
Selecting PTY
1. When you press the PTY button 8, the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons # to
select the desired PTY. Alternatively, when the
panel is closed, operate the SEARCH button
2 upward or downward to select a desired
PTY.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0 when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, “TRA INFO”
appears in the display. If you press the TA button
0 while a traffic announcement broadcast is be-
ing received, the traffic announcement broadcast
reception is cancelled and the unit goes into TA
standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the TA
button 0. The “TA” indicator in the display goes
off and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the TA button 0 searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the TA button
0, the “TA” in the display lights and the unit au-
tomatically searches a TP station.
Information standby mode
When the INFORMATION programme selected
in the “INFO SEL” display of the adjustment mode
starts, the unit switches to the selected INFOR-
MATION programme automatically.
∗ For details on “Information select”, refer to the
procedure below.
1. Press the TA button 0, for 1 second or longer,
“INFO” lights in the display and the unit is set
to INFORMATION standby mode until INFOR-
MATION starts.
* If you press the TA button 0 while the INFOR-
MATION programme is being broadcast, the
programme broadcast is cancelled and the unit
enters INFORMATION standby mode.
2. To cancel INFORMATION standby mode,
press the TA button 0 again for 1 second or
longer.
Note:
• Only in case of DAB connection, this can be oper-
ated even in the RDS tuner mode.