Clarion VRX633R Stereo System User Manual


 
VRX633R 23
English
Owner’s manual
CD Changer Operations
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a to-
tal of 2 changers (MD and/or CD).
Press the FNC button 1 and select the CD
changer mode to start play. If 2 CD changers are
connected, press the FNC button 1 to select the
CD changer for play.
If “NO MAG” appears in the display, insert the
magazine into the CD changer. “LOADING” ap-
pears in the display while the player loads (checks)
the magazine.
If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Pressthe PLAY/PAUSE button 3 to pause
play. PAUSE appears in the display.
2. To resume play, press the PLAY/PAUSE but-
ton 3 again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Each time you press and hold the DISP button
@ for 1 second or longer, the title display changes
in the following order.
When the panel is closed:
User title (disc) CD-text title (disc) CD-text
title (track) User title (disc)...
When the panel is open:
User title (disc) CD-text title (disc & track)
User title (disc)...
Note:
If the CD playing is not a CD-text CD or no user
title has been input, ---------- appears in the dis-
play.
Scrolling a CD-text title
When a CD-text title is longer than 16 charac-
ters (8 characters when the panel is closed), you
can scroll the display as follows.
Switching the PTY display language
Note:
This function is enabled only when the panel is
open.
You can select one of 4 languages (English, Ger-
man, Swedish or French) for the PTY displayed
in the display.
The factory default setting is GB (English).
1. Press the ADJ button £ to show the adjust-
ment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select "PTY LANG". After that, select
a desired language by operating the JOY-
STICK § rightward or leftward and then press
the ENT at the center of the JOYSTICK § to
change the setting.
GB: English
F: French
D: German
S: Swedish
3. Press the ADJ button £. The unit returns to
the previous mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
The factory default setting is 15.
During a TA, ALARM or PTY interrupt, operate
the VOLUME button 2 upward or downward
to set the volume to the desired level (00 to 33).
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
RDS Operations