VRX633R 21
English
Owner’s manual
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0 when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, “TRA INFO”
appears in the display. If you press the TA button
0 while a traffic announcement broadcast is
being received, the traffic announcement broad-
cast reception is cancelled and the unit goes into
TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” are lit in the display, press the
TA button 0. The “TA” in the display goes off
and TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the TA button 0 searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the TA button
0, “TA” lights in the display and the unit auto-
matically searches a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing the TA button
0
again makes the “TA” indicator go off and stops
TP station searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. With “TA” lit in the display, press the PS/AS
button 5 for 2 seconds or more.
2. The TP stations with the good reception con-
dition are stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a broad-
cast of the selected programme type when it
starts, even if the unit operates on a function
mode other than radio.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ Some countries do not yet have PTY broadcast.
∗ In TA standby mode, a TP station has priority over
a PTY broadcast station.
Selecting PTY
1. When you press the PTY button 8, the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons # to
select a desired PTY. Alternatively, when the
panel is closed, operate the SEARCH but-
ton 2 upward or downward to select a de-
sired PTY.
∗ Below are the factory default settings stored
for the PRESET buttons #.
3.
The PTY select mode is cancelled automatically
7 seconds after a PTY is selected.
● Cancelling PTY standby mode
When you press the PTY button 8 for 1 second
or longer, the indicator “PTY” goes off and PTY
standby mode is cancelled.
● Cancelling a PTY interrupt broadcast
Press the PTY button 8, during the PTY inter-
rupt broadcast to display the subsidiary, the PTY
interrupt is cancelled and the unit returns to PTY
standby mode.
PTY seek
1. Press the PTY button 8, the PTY select mode
is turned on.
2. Select a desired PTY.
3. Press the right or left side of the SEARCH
button 2. If you press the right side, the unit
seeks a PTY broadcast moving up the fre-
quencies; if you press the left side, it seeks
moving down the frequencies.
PTY item
ENGLISH Contents
1 NEWS News
2 INFO Information
3 POP M Pop music
4 SPORT Sports
5 CLASSICS Classics
6 M,O,R,M
Middle of the road music
Preset
number
RDS Operations