Clarion VRX633R Stereo System User Manual


 
VRX633R 35
English
Owners manual
Manual tuning
1. Press the FNC button 1 to select DAB mode.
2. Press and hold the BND button % for 1 sec-
ond or longer.
3. Select right or left to select a station using
the SEARCH button 2.
The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.
Note:
Manual tuning is cancelled if you do not operate
the unit for 7 seconds or longer.
Recalling a preset station
This unit has another preset memory function for
DAB stations. Up to 18 stations (6 for each
[MEM1], [MEM2] and [MEM3]) can be preset in
the PRESET buttons #.
1. Press the FNC button 1 to select DAB mode.
2. Press the BND button % to select anyone of
[MEM1], [MEM2] and [MEM3]. Each time you
press the BND button %, the display changes
in the following order:
[MEM1] [MEM2] [MEM3] [MEM1]...
3. Press the corresponding the PRESET button
# to recall the stored station.
Note:
Press and hold one of the PRESET buttons
#
for
2 seconds or longer to store that station into pre-
set memory.
Manual memory
1. Press the FNC button 1 to select DAB mode.
2. Press the BND button % to select anyone of
[MEM1], [MEM2] and [MEM3].
3. Select the desired station using seek tuning,
manual tuning or preset tuning, using the
SEARCH button 2.
4. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur-
rent station into preset memory.
Digital Radio/DAB Operations
Switching programmes
1. Press the FNC button 1 to receive a DAB
station.
2. Select right or left to switch programmes in a
DAB station using the SEARCH button 2.
Note:
Programmes may not be switched depending on
DAB station or broadcasting time.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press the FNC button 1 to receive a DAB
station.
2. Press the PS/AS button 5. The unit starts
scanning each programme for 10 seconds se-
quentially.
3. When a programme which you want to listen
is tuned in, press the PS/AS button 5 once
again.
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
The factory default setting is ON.
Switching OFF the AF function
Press the AF button 7, the AF indicator goes
off.
Switching ON the AF function
Press the AF button 7, the AF indicator lights.
If the reception of the current broadcast station
deteriorates, SEARCH lights in the display and
the radio searches for the same programme on
another frequency.
When AF is ON, if the reception of an RDS broad-
cast deteriorates, the AF indicator flickers.
AF function between RDS and DAB
Refer to the item of RDS tuner.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
RDS interrupt does not function during AM radio
reception or in TV mode.