34 VRX633R
English
Owner’s manual
Digital Radio/DAB
Operations
About DAB programmes
The Digital Audio Broadcasting (hereinafter re-
ferred to as “DAB”) system transmits several
programmes on one frequency simultaneously,
by compressing audio signals.
∗ The group of programmes, which is transmitted
on a single frequency is called “ensemble”.
∗ Some DAB stations have several ensembles and
broadcast diversified programmes.
∗ The number of programmes and the contents
which an ensemble provides depend on the broad-
cast stations and times. Since DAB programmes
are broadcast on several different frequencies, the
same programme can be enjoyed over large ar-
eas.
●
A DAB station has multiple programmes on one
frequency.
●
When you turn the unit on and select DAB
mode, the programme that starts is the one that
was selected before when the power was turned
off. If this programme is not available, another
programme is selected automatically.
● Programmes have their own names, just like
PS on RDS.
Note:
• For sophisticated audio quality, the receiver needs
to tune on a DAB Ensemble. While the receiver is
being tuned in to the DAB Ensemble, the Audio
outputs are muted. The tuning time is not fixed.
Listening to the DAB
1. Press the FNC button 1 and select the DAB
mode.
2. Press the right or left side of the SEARCH
button 2 to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the FNC button 1 to select DAB mode.
2. Press and hold right or left for 1 second or
longer using the SEARCH button 2.
∗ The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.
TV Operations
Changing over TV display size
∗ This function is available only when the panel is
open.
1. Press the DISP button @ for 1 second or
longer to display playback information such
as screen size.
2. Each time you press the DISP button @ for 1
second or longer to change over the TV dis-
play size, the TV display size changes in the
following order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜ “CIN-
EMA” ➜ “NORMAL”
● “NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV broad-
casting (4:3), the image can be shown with-
out being cut or deformed.
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a dis-
play disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide TV
display in a wide mode or a full-wide mode, a part
of the peripheral image will be lacking or deformed.
In deference to the intention of producer, an origi-
nal image can be viewed in a normal mode.
• During superimposed display, it becomes a full-
wide mode.
• In the DVD changer, when the monitor display size
is set in the CINEMA mode, a part of playback dis-
play such as play time may not be shown depend-
ing on the play disc.
In this case, change the monitor display size to a
mode other than the CINEMA mode.