8. Random Access Adjustment Mode
How to adjust Peaking?
1. Push the cursor key ↑ or ↓ to highlight Peaking and press ENTER. (menu 8-15)
Note: During the creation of new settings for a RGB source the corresponding peaking is switched on as default.
The Peaking menu will be displayed. (menu 8-16)
The following frequency areas are available:
Low Frequency Peaking 15–45Hz
Mid Frequency Peaking 45–85Hz
High Frequency Peaking 85–110Hz
2. Push the cursor key ↑ or ↓ to select the des ired frequency area or off and press ENTER to activate.
3. Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
DECODING : EBU
PORT2 : VIDEO
PEAKING
LINE MULTIPLIER : ON
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-15
PEAKING
OFF
LOW FREQUENCY
MID FREQUENCY
HIGH FREQUENCY
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-16
8.5.7 Line Multiplier Settings
Overview
• Starting up Line Multiplier settings
• Switching the multiplier ON/OFF
• Motion P roces sing O n/ Off
• Output Mode
• Video Equalizing
• Noise Reduction
• Contrast Enhancement
• Split Screen On/Off
• Advanced Settings
8.5.7.1 Starting up Line Multiplier settings
What can be done?
The multiplier eliminates the video line patterns and im proves the image stability.
In addition:
• The time base correction virtually eliminates the timing jitter caused by the com m o n videocassette recorders.
• De-interlacing gets rid of line flicke r.
• Film mode processing makes sure that material that has been converted from 24 Hz cinema to video (2:2 and 3:2 pull down) is
displayed without artifacts.
• Dynamic noise reduction can be used to im prove noisy video sour ces.
• Static contrast enhancement allows the user to adjust the image contrast to personal taste.
• Several detail-enhancing filters bring out details.
Line multiplying is only possible for Video, S-Video, Component Video images on standard line frequency and
RGB signals on 15 kHz.
The setting of the line multiplier will be saved t ogether with the source n um ber. Each time this source number
is selected, the last saved ve rsion will be loaded.
R5976584 BARCO CINE7 26022003 57