Filter
Top Products
Chapter 4
Cable & Antenna
Analysis
Introduction
This chapter provides a description of cable and antenna measurements in one port and two
port modes. Measurements include line sweeping fundamentals and line sweeping measure
-
ment procedures, available when the Site Master is in frequency or DTF mode.
One Port Measurements
Line Sweep Fundamentals
In wireless communication, the transmit and receive antennas are connected to the radio
through a transmission line. This transmission line is usually a coaxial cable or waveguide.
This connection system is referred to as a transmission feed line system. Figure 4-1 shows
an example of a typical transmission feed line system.
4-1
4
Figure 4-1. A Typical Transmission Feed Line System