Filter
Top Products
Chapter 5
Software Tools
Program
Description
The Site Master Software Tools program provides the means for transferring the measured
trace, along with any applied markers and/or a limit, to the screen of an MS-DOS based
personal computer (PC) running Windows 95/98/NT.
Requirements
The Site Master Software Tools program is a standard Windows program and will run on
any computer that will run Windows 95/98/NT. Typically, this means having a PC with the
following characteristics:
·
Pentium microprocessor (100 MHz or better, recommended)
·
Microsoft Windows 95/98/NT
·
32 MBytes of memory, minimum
·
Approximately 15 MBytes of available hard drive space
Communication Port Setting
The Site Master Software Tools communicates with the Site Master through a standard
COM port on the PC. It is important that your Windows COM port settings conform to the
actual hardware settings. Since various add-in devices such as sound cards, modems, and
network cards use IRQ (Interrupts), it is possible that your computer has non-standard
COM port settings. Please consult your computer vendor for COM port address and IRQ in
-
formation.
Changing COM Port Settings–Windows 95/98/NT
Step 1. Open the Windows Control Panel.
Step 2. Double click on the
SYSTEM icon. The System Properties window appears.
Step 3. Select
Device Manager. The Device List appears.
Step 4. Double click on the item Ports (COM & LPT) in the device list.
Step 5. Double click on the communications port you want to set. The Communications
Port Properties window appears.
NOTE:
If Windows doesn't show any available COM Ports, consult your computer
manufacturer.
5-1
5