Filter
Top Products
MARKER Choosing MARKER causes the soft keys, below, to be displayed and the corre
-
sponding values to be shown in the message area. Selected frequency marker or
distance marker values may be changed using the keypad or Up/Down arrow
key.
q
M1 — Selects the M1 marker parameter and opens the Markers second level
menu.
q
M2 — Selects the M2 marker parameter and opens the Markers second level
menu.
q
M3 — Selects the M3 marker parameter and opens the Markers second level
menu.
q
M4 — Selects the M4 marker parameter and opens the Markers second level
menu.
q
ALL OFF — Turns all markers off.
Markers
(second level)
Provides for turning the selected marker on and off and for setting marker val
-
ues. Selected frequency marker and distance marker values can be changed us
-
ing the keypad or Up/Down arrow key.
Choosing
M1, M2, M3,orM4 in FREQ or DTF measurement modes causes the
soft keys, below, to be displayed and the corresponding values to be shown in
the message area.
q
ON/OFF — Turns the selected marker on or off.
q
EDIT — Opens the selected marker parameter for data entry. Press ENTER
when data entry is complete or ESCAPE to restore the previous value.
q
DELTA (Mx-M1) — Displays delta amplitude value for as well as delta fre-
quency or distance for the selected marker with respect to the M1 marker.
q
MARKER TO PEAK — Places the selected marker at the frequency or dis-
tance with the maximum amplitude value.
q
MARKER TO VALLEY — Places the selected marker at the frequency or dis
-
tance with the minimum amplitude value.
q
BACK — Returns to the Main Markers Menu.
3-17
Chapter 3 Functions and Operations