Filter
Top Products
Step 24. Enter 6, 2, 5 using the key pad or the Up/Down arrow key. Press ENTER to set
the Start Frequency to 625 MHz.
Step 25. Use the Up/Down arrow key to scroll to the
START FREQ LIMIT parameter and
press
ENTER to edit the value.
Step 26. For FREQ-SWR, enter 1, ., 1, 2. For FREQ-RETURN LOSS, enter 2, 5. Press
ENTER to set the Start Frequency Limit value.
Step 27. Use the Up/Down arrow key to scroll to the
STOP FREQ parameter and press
ENTER to edit the value.
Step 28. Enter 2, 5, 0, 0 using the key pad or the Up/Down arrow key. Press
ENTER to
set the Stop Frequency to 2500 MHz.
Step 29. Use the Up/Down arrow key to scroll to the
STOP FREQ LIMIT parameter and
press
ENTER to edit the value.
Step 30. For FREQ-SWR, enter 1, ., 2. For FREQ-RETURN LOSS, enter 2, 1. Press
ENTER to set the Stop Frequency Limit value.
Step 31. Press
ENTER at OK to accept the values and activate the Segment 1 limit line.
NOTE:
Alternatively, if the Start and Stop frequencies are the full span of the Site Mas-
ter, simply edit the Start and Stop frequency Limits and select the
FULL SPAN
soft key. Press ENTER at OK to accept and activate the Segment 1 limit line.
4-12
Chapter 4 Measurements