Filter
Top Products
Step 3
Step 4
Step 5
56
Installation Procedures
Verify that all hoist assembly hardware is fully in tact before lifting the reflector to avoid
personal injury or damage to the reflector.
Route the crane’s cable and hook from the hoist over the slings, and attach the shack-
le’s hook to the crane’s hook for raising the reflector.
Position a person at the end of each tag line to guide the reflector as it is being lifted,
and position another person on the mount to crank the hoist.
NOTE: The crane’s hook must be perfectly aligned with the top of the reflector’s hook
so that it can be lifted straight up.
Figure 3-44a: Crane Lift
Figure 3-44b: Crane Lift