Filter
Top Products
Enclosure
(Pedestal Mount
Only)
Step 1
52
Installation Procedures
The enclosure (P/N 202934A) assembly attaches to the rear of the reflector. The enclo-
sure provides weather protection for RF equipment and can accommodate up to a 4-
port combiner network. An example of the assembled enclosure is presented in Figure
3-38a and Figure 3-38b.
Figure 3-38a: Enclosure - Final Assembly
Figure 3-38b: Enclosure - Final Assembly
Before assembling the enclosure, verify that the appropriate parts are present. The fol-
lowing steps provide the procedure for the enclosure assembly.
Remove the rear covers and corresponding side panels from the enclosure assembly.