Filter
Top Products
96 Digitizers Command Reference Chapter 3
STATus:OPERation[:EVENt]?
STATus:OPERation[:EVENt]? returns a decimal-weighted number
representing the bits set in the OPERation Status Event Register. This
command clears all bits in the Event Register when executed.
STATus:PRESet
STATus:PRESet affects only the OPERation Status Enable Register and
the QUEStionable Status Enable Register by setting all Enable Register bits
to 0. It does not affect the Status Byte Register or the Standard Event Status
Register. STATus:PRESet does not clear any of the Event Registers.
STATus:QUEStionable:CONDition?
STATus:QUEStionable:CONDition? returns a decimal-weighted number
representing the bits set in the QUEStionable Status Condition Register.
STATus:QUEStionable:ENABle
STATus:QUEStionable:ENABle <unmask> enables (unmasks) bits in the
QUEStionable Status Enable Register to be reported to the summary bit
(setting Status Byte Register bit 3 true). The Event Register bits are not
reported in the Status Byte Register unless specifically enabled.
STATus:QUEStionable:ENABle?
STATus:QUEStionable:ENABle? returns a decimal-weighted number
representing the bits enabled in the QUEStionable Status Enable Register
signifying which bits will set QUE (bit 3) in the Status Byte Register.
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable[:EVENt]? returns a decimal-weighted number
representing the bits set in the QUEStionable Status Event Register.
This command clears all bits in the Event Register when executed.