Filter
Top Products
Digitizers Command Reference 91Chapter 3
[SENSe:]SWEep:OFFSet:POINts
[SENSe:]SWEep:OFFSet:POINts <count> | MIN | MAX sets the number of
sweep offset points. <count> must be a negative number.
Comments This command is the same as SAMPle:PRETrigger:COUNt, except the sign
on <count> is negative here, whereas it is positive for pretrigger count and
is included for SCPI compatibility.
[SENSe:]SWEep:OFFSet:POINts?
[SENSe:]SWEep:OFFSet:POINts? [MIN | MAX] returns the sweep offset
points.
[SENSe:]SWEep:POINts
[SENSe:]SWEep:POINts <count> | MIN | MAX sets the number of sweep
points. The number of points set is common to all channels. You cannot
have two different channels with different a sweep point count.
Parameters
*(memory size in bytes)/number of channels * 2) = 128M/4 or 128M/8 (MAX)
Comments This command is the same as SAMPle:COUNt and is included for SCPI
compatibility.
[SENSe:]SWEep:POINts?
[SENSe:]SWEep:POINts? [MIN | MAX] returns the sweep points.
Name Type Range of Values Default Value
<count> numeric 1 to 32M* (E1563A)
1 to 16M* (E1564A)
N/A