Filter
Top Products
3-7
Installation and Setup Guide for Campus Manager 4.0 on Windows
78-16401-01
Chapter 3 Preparing to Use Campus Manager
Setting Up Campus Manager Applications
Setting Up Topology Services
To set up Topology Services:
Step 1 Verify that the ANI Server is running
Step 2 Make sure the ANI Server has managed the devices from Discovery Metrics page.
Step 3 From CiscoWorks Homepage select Campus Manager > Topology Services to
start the application.
For more information, see the Topology Services online help.
Configuring Network Discrepancies
You can configure the network discrepancies that you would like to be reported
by selecting and deselecting the listed discrepancies. To do this, select
Campus Manager > Administration >Network Discrepancy.
See User Guide for Campus Manager for more information.
Verifying Topology Services
To verify that Topology Services is working properly:
Step 1 Verify that all devices and interfaces are discovered.
Properly discovered devices and interfaces appear in green in the Topology
Services window.
Step 2 Verify that devices displayed in red are reachable and have correct community
strings.
Step 3 Verify that all VLANs and ELANs are discovered and that their port assignments
are correct.
For more information, see the Topology Services online help.
The devices will be shown in Topology services only after data collection.