Filter
Top Products
Chapter 3 Preparing to Use Campus Manager
Overview of Campus Setup Tasks
3-2
Installation and Setup Guide for Campus Manager 4.0 on Windows
78-16401-01
Overview of Campus Setup Tasks
Table 3-1 provides an overview of Campus Manager setup tasks, with references
to more detailed information about each task.
Accessing the CiscoWorks Server
Note You must set up the client system before using Campus. See Installation and
Setup Guide for CiscoWorks Common Services 3.0 (Includes Ciscoview) on
Windows for configuring browser and client systems.
To access Campus Manager, enter the URL of the CiscoWorks Server in your web
browser:
http://server_name:1741
https://server_name:1742 (for SSL mode)
where server_name is the name of the CiscoWorks Server and 1741and 1742 are
the ports on which it was installed. If you were prompted to supply a different port
number for the CiscoWorks Server during the installation, use that port number in
the URL.
Table 3-1 Preparing to Use Campus Manager Task Overview
Task Steps References
1. Access the
server.
Access the CiscoWorks Server. “Accessing the CiscoWorks Server”
section on page 3-2
2. Perform
administrator
setup tasks.
Log in to the server as administrator. “Logging In as Administrator” section
on page 3-3
3. Set up
applications.
Start and configure applications. “Setting Up Campus Manager
Applications” section on page 3-3
4. Log out. Log out of the server. “Logging Out as Administrator”
section on page 3-12