Filter
Top Products
Chapter 3 Preparing to Use Campus Manager
Setting Up Campus Manager Applications
3-6
Installation and Setup Guide for Campus Manager 4.0 on Windows
78-16401-01
For more information, see Specifying Seed Device online help.
After you set up your network, continue to the “Configuring Data Collection”
section on page 3-6.
Configuring Data Collection
To configure Data Collection:
Step 1 From CiscoWorks Homepage, select Campus Manager > Administration.
The Campus Administration window opens.
Step 2 Click on Campus Data Collection > Data Collection Filters.
Step 3 Select IP Address Range, Click Configure
The IP Range Filter dialog box appears.
Step 4 Specify the IP Address Range, Click Apply.
A confirmation dialog box appears.
Step 5 Click OK to start Data Collection. Click Cancel to apply the changes.
If the IP address range is not specified, ANI takes all devices from the Device
Credentials Repository.
See Using ANI Data Collection Administration online help for assistance in
performing these tasks.
After you configure Data Collection, see the “Setting Up Your Network” section
on page 3-4.
Note The number of devices that can be data collected depends upon your licence limit.