Filter
Top Products
30
© 3M 2011. All Rights Reserved.
3M™ Digital Projector X56
Using the menu function (continued)
3.
To close the MENU, press the MENU button again or select EXIT and press
the ◄ cursor button or ENTER button. The dialog will automatically disappear
after about 30 seconds.
●
If you want to move the menu position, use the cursor buttons after pressing
the POSITION button.
● Some functions cannot be performed when a certain input port is selected,
or when a certain input signal is displayed.
● When you want to reset the operation, press RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE,
VOLUME) cannot be reset.
● In the ADVANCED MENU, when you want to return to the previous display,
press the ◄ cursor button or ESC button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication Meaning
EXIT
Select to close the OSD menu. It's the same as pressing the
MENU button.
RETURN Select to display the previous menu.
CANCEL or NO
Select to cancel the operation in the present menu and return
to the previous menu.
OK or YES
Select to execute the prepared function or shift the menu to
the next menu.
Operating