Filter
Top Products
26
© 3M 2011. All Rights Reserved.
3M™ Digital Projector X56
Operating
PERFECT FIT
2.
When PERFECT FIT is selected,
pressing the ► or ENTER button
displays the KEYSTONE_PERFECT
FIT dialog.
3.
If it is necessary to initialize the
current adjustment, select RESET in
the dialog with the RESET button, and
press the ENTER or INPUT button.
4.
Select one of the corners or sides
to be adjusted with the ▲/▼/◄/►
buttons and press the ENTER or
INPUT button.
5.
Adjust the selected part as below.
●
For adjusting a corner, use the ▲/▼/◄/► buttons to adjust the position of the
corner.
●
For adjusting the upper or lower side, use the ◄/► buttons to select any one
point on the side, and use the ▲/▼ buttons to adjust the distortion of the side.
● For adjusting the left or right side, use the ▲/▼ buttons to select any one
point on the side, and use the ◄/► buttons to adjust the distortion of the
side.
● To adjust another corner or side press the ENTER or INPUT button and
follow the procedure from step 4.
• Each corner and side can be adjusted individually but in some cases
it may be adjusted in conjunction with another corner or side. This is due to
control restrictions and not a malfunction.
NOTE
6.
To close the operation, press the KEYSTONE button, or select EXIT in the
dialog with ▲/▼ buttons and press the ► or ENTER button. Alternatively,
select RETURN in the dialog with the ▲/▼ buttons and press the ◄ or
ENTER button to return to the menu in step 1.