SERVICE CALL CONDITIONS April 2007
4-60
Shift jogger retraction motor error SC728 B
The side fences do not retract within the
prescribed time after the retraction motor
switches ON. The 1st detection failure issues
a jam error, and the 2nd failure issues this
SC code.
• Motor harness disconnected,
loose, defective
• Motor defective
• Motor overload
• HP defective
Finisher Tray 1 shift motor error SC730 B
The shift roller HP sensor of the
upper tray does not activate
within the prescribed time after
the shift tray starts to move
toward or away from the home
position. The 1st detection
failure issues a jam error, and
the 2nd failure issues this SC
code.
• Shift tray HP sensor of the upper tray
disconnected, defective
• Shift tray motor of the upper tray is
disconnected, defective
• Shift tray motor of the upper tray
overloaded due to obstruction
Finisher corner stapler motor error SC740 B
The stapler motor does not
switch off within the prescribed
time after operating. The 1st
detection failure issues a jam
error, and the 2nd failure issues
this SC code.
• Staple jam
• Number of sheets in the stack exceeds
the limit for stapling
• Stapler motor disconnected, defective
Finisher corner stapler rotation motor error SC741 B
The stapler does not return to its
home position within the
specified time after stapling. The
1st detection failure issues a jam
error, and the 2nd failure issues
this SC code.
• Stapler rotation motor disconnected,
defective
• Stapler rotation motor overloaded due to
obstruction
• Stapler rotation HP sensor disconnected,
defective
Finisher stapler movement motor error SC742 B
The stapler HP sensor is not
activated within the specified
time after the stapler motor
turned ON. The 1st detection
failure issues a jam error, and
the 2nd failure issues this SC
code.
• Stapler movement motor disconnected,
defective
• Stapler movement motor overloaded due
to obstruction
• Stapler HP sensor disconnected,
defective
