A SERVICE OF

logo

August, 2006 DUPLEX UNIT
3-111
3.10.5 DUPLEX JOGGER BELT
Remove:
Remove the inverter unit (3.10.3)
Cross stay (3.10.3)
Reverse trigger roller assembly (3.10.3)
Jogger fences (3.10.3)
Left transport cover (3.10.3)
Duplex jogger motor (3.10.4).
1. If you are replacing the belt, set both jogger fence brackets at the center of the
belt and tighten the screw [A].
2. If you are adjusting the belt, loosen the screw and slide the plastic piece [B] on
the belt to the left or right to adjust the position of the front fence, then tighten
the screw.
B140R819.WMF
[A]
[B]