SERVICE CALL CONDITIONS April 2007
4-56
RSS communication error (Not use) SC630
C
An error was detected in
communication via RSS between
the machine and the RSS center.
Error occurred on a public line at
the RSS terminal.
• No action required
Key/card counter device error 1 (Not use) SC632
B
After 1 data frame is sent to the
device, an ACK signal is not
received within 100 ms, and is not
received after 3 retries.
• The serial line from the device to the
copier is unstable, disconnected, or
defective.
Key/card counter device error 2 (Not use) SC633
B
During communication with the
device, the BICU received a break
(Low) signal.
• The serial line from the device to the
copier is unstable, disconnected, or
defective.
Key/card counter device error 3 (Not use) SC634
B
After installation of the device, a
message alerts user to a backup
RAM error.
• Device control board defective
• Device control board backup battery
defective
Key/card counter device error 4 (Not use) SC635
B
After installation of the device a
message alerts user to a battery
voltage abnormal error.
• Device control board defective
• Device control board backup battery
defective
Engine startup error
SC670
D
• Engine does not respond within
30 s after power ON.
• Engine down detected suddenly
during power ON and warmup.
• BICU installation incorrect
• BICU defective
• Sudden communication reset occurred
between the BICU and the controller.
GW controller startup error
SC672
D
• After power ON, the line between
the GW controller and the
operation panel did not open for
normal operation.
• After normal startup,
communication with the GW
controller stopped.
• GW Controller stalled
• GW Controller installed incorrectly
• GW Controller board defective
• Operation panel harness disconnected or
defective
