124 2H. microSD Card
Re-inserting the microSD Card
1. Remove the battery cover.
Ⅲ Grasp the device firmly and locate the cover
release latch.
Ⅲ Place your fingernail in the opening and firmly
“pop” the cover off the device (similar to a soda
can).
2. Orient the card with the gold strips facing down.
3. Firmly press the card into the slot and make sure
that it catches with the push-click insertion.
microSD Icon Indicators
The following icons show your microSD card
connection status at a glance:
– card has been unmounted (released from use)
from the device.
– card is being prepared for use and for
mounting.
– card has been removed.
WARNING: Do not over-insert the card as this can damage
the contact pins.
Note: Be sure to use only recommended microSD cards
(<
32GB). Using non-recommended microSD cards
could cause data loss and damage your device.
Note: Make sure the microSD card's gold contacts are facing
down.
SPH-D700.book Page 124 Tuesday, August 17, 2010 11:14 AM
