120 2G. Voice Services
ⅷ Open <Menu> to jump directly to menu items or
applications. (See “Opening Menus With Voice
Dialer” on page 121.)
Calling a Contact With Voice Dialer
1. Press and tap > (Voice Dialer).
2. When you see “Listening,” say “Call” followed by
the name and the label for the contact you wish to
call. For example, say “
Call John Smith Mobile.” The
device dials the number stored for the contact
“
John Smith” with the label “Mobile.”
Ⅲ If the location is not recognized or the name does
not have a phone number stored in Contacts, you
will see an onscreen list of possible options.
Ⅲ If a name has only a single number, or if you
know the name but are not sure which number to
call, say “
Call” followed by the name only. For
example, say “
Call John.”
● If the name is recognized and there is only
one phone number for the name, your device
immediately places the call.
● If there are multiple numbers, you will see a
list; tap a number to place the call.
Calling a Phone Number With Voice Dialer
1. Press and tap > (Voice Dialer).
2. When you see “Listening,” say “Call” followed
immediately by a valid string of digits to be dialed,
for example, say “
Call 555 555 5555.”
Speak naturally and clearly and remember to speak
one digit at a time—1-800 should be pronounced “One
Eight Zero Zero.”
Tip: Use Voice Dialer in a quiet environment so it can
accurately recognize your commands.
SPH-D700.book Page 120 Tuesday, August 17, 2010 11:14 AM
