Call Functions
24
When the phone is open, you can also press the
Reject soft key.
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of
the phone.
Press the key to increase the volume level and
the key to decrease the level.
You can also adjust the key tone volume in the
idle mode with the folder open using these keys.
Accessing Options During a Call
Your phone provides a number of control
functions that you can use during a call:
Putting a Call on Hold
You can place the current call on hold whenever
you want. You can make another call while you
have a call in progress if your network supports
this service. Of these two calls, one is active and
the other is on hold and you can switch between
them.
To place a call on hold, simply press the Hold
soft key. You can reactivate the call whenever
you want, by pressing the Unhold soft key.
Making a Second Call
To make a call while you have a call in progress:
1. Press the Options soft key.
2. Select New call and press the OK key.
Call Functions
25
3. Enter the phone number you want to dial and
press the key to make the second call.
The first call is automatically put on hold.
Note
: You can first enter a phone number and then
press the
Options
soft key. Then select the
New call
option.
Or alternatively:
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
SWAP soft key. The current call is placed on hold
and the call on hold is reactivated so that you can
continue conversing with the other person.
To end the current call, press the key. The
call on hold is still on hold. To reactiveate this call
press the Unhold soft key.
To end both calls at one time, close the folder, or
press the Options soft key and select Exit.
Answering a Waiting Call
You can answer an incoming call while you have
a call in progress, if this service is supported by
the network and you have activated the Waiting
menu option;see page 101. Your phone alerts
you to an incoming call by sounding a call waiting
tone.
To answer a call while you have a call in
progress:
1. Press the Accept soft key to answer the
incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
SWAP soft key.
To end the current call, press the key. The
call on hold is automatically activated.
To end both calls at one time, close the folder, or
press the Options soft key and select Exit.
Z100.book Pages 24 - 25 Thursday, October 9, 2003 9:52 AM
