![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/b/c1/bc10c65d-d7e2-4948-9753-a711aeffa1a4/bc10c65d-d7e2-4948-9753-a711aeffa1a4-bg5d.png)
Omnia 6 Use and Installation Guide – Version 1.00a
76
76
Omnia6_remote1.exe onto the computer's hard disk and places the program name Omnia Remote Control
in the Start Menu. The default location for the copied files is "C:\program files\Telos_omnia\omnia6".
When the program is freshly installed but has not yet been run, "Omnia6_remote1.exe" is the only file in
the specified folder. However, the first time that the program is run, it will create a small new file called
"connect.dat", which contains your connection type information. When you first run the Omnia 6 Remote
Control program, there is no "connect.dat" file yet, so you will receive the error message "No connection
database. Creating new database". This is normal and is no cause for concern.
Using the raw Executable
Using standard Windows procedures, create a new folder by the name you wish to use, and place a copy of
"Omnia6_remote1.exe" in that folder. You can then also create a desktop shortcut to that executable if
desired.
Note: When you install Omnia Remote Control software updates, you should move the old version and its
associated connect.dat file to a new folder. This way, conflicts with different versions of the connect.dat
database will be avoided. If you wish, the old version’s folder can be safely deleted once the update is
complete. You will also want to use unique folder names for each copy of other Omnia remote control
programs if you have those installed. Please note that the remote control programs themselves, as well as
their associated connect.dat files are unique for each version of the Omnia Classic, Omnia 3, Omnia4.5,
Omnia 6fm, and Omnia Toolvox.
Setting Up and Configuring Omnia Remote Control
The Remote Control Program for the Omnia-6fm is specific to the Omnia-6fm. As stated earlier, Omnia
Remote Control programs designed for our other
Omnia family of products will not work with Omnia 6.
The latest versions of all Omnia remote control programs are always available free of charge through the
"Support" page of our web site: www.omniaaudio.com