External Sync Range: Accepts sample rates from 32kHz to 96 kHz. Used for synchronization of
the Digital Output signal to an external reference. Automatically accepts sample
rates between 32 and 96 kHz.
Composite Outputs
Composite Baseband Outputs
Configuration: Two electrically independent outputs. Software based level adjustment.
Source Impedance: 10 ohms or 75 ohms, internal jumper-selectable. Single-ended and
floating over chassis ground.
Load Impedance: 50 ohms or greater load is suggested.
Output Level Range: 1.25 V p-p to 9.50 V p-p, software selectable.
Pilot Level: Adjustable from 6.0% to 12.0% in 0.1% steps.
Pilot Stability: 19 kHz, ± 0.5 Hz. Tighter tolerance available on special order.
D/A Conversion: Burr Brown PCM1704, 24-bit sign-magnitude D/A converter.
Signal-to-Noise Ratio: -85 dB typical, 75 µS de-emphasized, 15 kHz bandwidth, referenced to
100% modulation).
Distortion: < 0.02% THD 20 Hz – 15 kHz bandwidth, 75 µS de-emphasized,
referenced to 100% modulation.
Stereo Separation: Greater than 55 dB, 30 Hz – 15 kHz.
Linear Crosstalk: > -80 dB, main to sub or sub to main channel (referenced to 100%
modulation).
Non-linear Crosstalk: > -80 dB, main to sub or sub to main channel (referenced to 100%
modulation).
38 kHz Suppression: > 70 dB (referenced to 100% modulation).
76 kHz Suppression: > 80 dB (referenced to 100% modulation).
Pilot Protection: > -65 dB relative to 9% pilot injection, ± 1 kHz.
57 kHz (RDS/RBDS)
Protection: better than -50 dB.
Connectors: Two EMI suppressed female BNC, floating over chassis ground.
Maximum Load
Capacitance: 5nF (at 10 ohms source impedance).
Maximum cable length: 100 feet/30 meters RG-58A/U.
System Remote Control
Remote Control Methods
Configuration: Modem, direct serial, or 10/100BaseTX Ethernet.
Modem: Supplied PCMCIA modem with pop-out X-jack connector or any Hayes
command set compatible external modem.
