Omnia 6 Use and Installation Guide – Version 1.00a
37
37
Reboot Display
After network changes have been saved in the above step, the front panel must be rebooted in order to
make the changes active in the network hardware.
Test Broadcast
The Test Broadcast button sends a series of UDP packets out over the network interface. The message
contained in the packets is "An Omnia Broadcast Datagram". These test packets may be used to
troubleshoot routing and other issues on the customer's network.
Security Config
Under the Security Configuration screen you can assign what submenus may be accessed at password
Levels 1 and 2, the lesser security levels. The Level 3 security level is the Master security level, and ALL
submenus and functions may be accessed at that level.
Security Config Submenu
The "Stealth Mode When Locked" option causes the front panel processing bargraph metering to stop
showing processing activity, and the selected preset name to be hidden from view when the Omnia is
locked. Note that the Input and Output meters are still active in "Stealth Mode".
