Omnia 6 Users Guide – Ver 1.00a
CANADA WARNING – This digital apparatus does not exceed the Class A limits for
radio noise emissions set out in the Radio Interference Regulations of the Canadian
Department of Communications. Le present appareil numerique n'emet pas de bruits
radioelectriques depassant les limits applicables aux brouillage radioelectrique edicte par
le ministere des Communications de Canada.
CE CONFORMANCE – This device complies with the requirements of the EEC Council
Directives: 93/68/EEC (CE Marking); 73/23/EEC (Safety – low voltage directive);
89/336/EEC (electromagnetic compatibility). Conformity is declared to those standards:
EN50081-1, EN50082-1.
LITHIUM BATTERY CAUTION -- Danger of explosion if the internal battery is
replaced incorrectly. Replace only with same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions.
USE OF SHIELDED CABLING -- To conform to the CE requirements for
High Frequency radiation, shielded cables must be used for all audio and
data connections. For analog and digital connections, the cable shield MUST
be connected to the XLR-type connector shell, which is at chassis ground
potential!
