Timers Sub Tab
Use the Timers sub tab to set timers and view information about how
long the unit has been on.
To access the Timers sub tab
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to select the Setup tab, and then select
the Timers sub tab.
Timers Sub Tab
User—allows you to set the timer to Count Up or Count Down.
You can also Reset the timer and turn it Off. Enter a time to use
when counting up or down.
Marine—appears on the Compass Page in Marine Mode. See
page 48.
Since Midnight—shows the time the unit was turned on since
midnight. To reset, select All Unit Defaults on the System sub tab.
Time Sub Tab
Use the Time sub tab to set the time format and zone, and set the
unit to conform to Daylight Saving Time. The current time and date
appear in the Current Time and Date field.
To access the Time sub tab
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to select the Setup tab, and then select
the Time sub tab.
Time Sub Tab
Time Zone—choose the time zone for your city so the
GPSMAP 276C shows the correct local time. Select Other to
enter a UTC Offset.
If the wrong date appears, press MENU, highlight Set Date, and
press ENTER. You are prompted to enter the current year. The
GPSMAP 276C uses this information when gathering satellite data
to show the correct date.
GPSMAP 276C Owner’s Manual 83
MAIN MENU > SETUP TAB
