Editing a Waypoint
The User sub tab shows a master list of all waypoints currently
stored in memory. From the User list, you can review, edit, rename,
or delete individual waypoints, or delete all user waypoints.
User Sub Tab
The total number of stored and available waypoints appears at the
bottom of the User sub tab, with the stored waypoints arranged in
alphanumeric order.
To start a Go To from the User sub tab:
1. Press MENU twice to open the Main Menu.
2. Select Points from the Main Menu, and then highlight User.
3. Highlight the waypoint you want in the list.
4. Press NAV to open the Navigate Menu. Highlight Go To
<Point Name>, and press ENTER.
To edit a waypoint:
1. Open the Waypoint Review or Waypoint Edit Page.
2. Highlight the waypoint name, symbol, or another field you
want to change, and press ENTER.
Waypoint Page
Name field
Symbol field
3. Use the ROCKER to select a symbol or enter data, and
press ENTER when finished.
To edit the next waypoint in the list:
1. After you edit the waypoint on the Waypoint Edit Page
(shown above), highlight Next, and press ENTER. The
Waypoint list appears with the next waypoint highlighted.
2. Press ENTER to edit that waypoint.
30 GPSMAP 276C Owner’s Manual
BASIC OPERATION IN MARINE MODE > CREATING AND USING WAYPOINTS
