Position Data Page
The Position Data Page shows important navigation data while
navigating a route in Marine Mode. By default, the page shows a
compass ribbon, your current latitude and longitude, the current date
and time, your location in relation to a prominent nearby landmark
such as a waypoint or city, and eight user-selectable data fields. The
compass ribbon appears at the top of the page to show your current
heading with a red, vertical bar. To stay on course, steer toward the
violet bar (or arrows) until it is aligned with the red bar.
Press PAGE repeatedly to open the Position Data Page.
Position Data Page
Your present location
is 5.6 nm west of
Coronado, CA
Position Data Page Options
With the Position Data page open, press MENU to open the options
menu. You can customize the layout of the page and change the
data fields. For an explanation of the data fields, see page 116 in the
“Appendix.” You can also select one of the following options:
Change Nearest Type
—allows you to specify the type of item to
be used as the nearest item (shown in the lower-left data field). The
choices change based on the current Usage Mode.
Reset Trip
—clears trip information, except the maximum speed and
the odometer.
Reset Max Speed—clears the maximum speed.
Reset Odometer—clears the running total of the distance traveled
since the odometer was last reset.
Reset All
—clears all trip information including the maximum speed
and odometer.
GPSMAP 276C Owner’s Manual 53
MARINE MODE PAGES AND FEATURES > POSITION DATA PAGE
