To go to a highlighted map item:
1. Use ROCKER to highlight the item to which you want to
navigate on the Map Page.
2. Press NAV. Go To <point name> appears in the list of
options and is automatically highlighted. If you selected an
area of the map that is not a map feature, Go To MAP Point
is listed. Select Go To <point name> or Go To MAP Point,
and press ENTER.
Navigate Menu
3. Follow the magenta route created on the Map Page. Follow
the turn-by-turn route (auto-route) by using the Next Turns
Page and Current Route Page. If you are using the external
speaker, follow the voice prompts.
To start a new route using the Find Menu:
1. Press the NAV key to open the Navigate menu.
2. Highlight Go To Point, and press ENTER to open the Find
menu.
3. From the Find menu, highlight Waypoints and press ENTER.
(You can also choose to go to other points, such as Cities or
Tide Stations from this list. The steps vary only slightly from
those listed for Waypoints.)
4. Select a waypoint from the list, and press ENTER to open the
Waypoint Review Page.
Waypoint Review Page
5. With the Go To button highlighted, press ENTER to begin
navigation.
14 GPSMAP 276C Owner’s Manual
BASIC OPERATION IN MARINE MODE > NAVIGATING IN MARINE MODE
