To turn proximity alarms on or off:
1. Press MENU twice to open the Main Menu.
2. Highlight the Points tab, and then highlight the Proximity
sub tab.
3. Use the ROCKER to highlight the Proximity Alarm field, and
press ENTER.
4. Select On or Off, and press ENTER.
To add a proximity waypoint:
1. From the Proximity sub tab, use the ROCKER to highlight
an empty line on the Proximity List, and press ENTER. The
Find menu appears.
2. Select a waypoint or point of interest from the Find menu.
With OK highlighted, press ENTER to select that point. (For
complete information about selecting waypoints or points of
interest from the Find Menu, see “Finding an Item” on page
16).
3. The distance field is now highlighted. Press ENTER to begin
entering the proximity radius.
4. Use the ROCKER to enter a distance value (up to 99.99
units), and press ENTER.
To clear one or all proximity waypoints from the list:
1. Press MENU twice to open the Main Menu.
2. Select the Points tab, and then highlight the Proximity sub
tab.
3. Use the ROCKER to highlight the proximity waypoint to clear,
and press MENU.
Proximity Points Tab Options Menu
4. To clear a single alarm, highlight Remove Point, and press
ENTER. To clear all proximity waypoints, select Remove All,
and press ENTER.
5. Use the ROCKER to highlight OK, and press ENTER to
confirm.
34 GPSMAP 276C Owner’s Manual
BASIC OPERATION IN MARINE MODE > CREATING AND USING WAYPOINTS
