Creating and Using Routes
Use the GPSMAP 276C to create and store up to 50 reversible
routes, with up to 300 points each.
Creating a Route
Use the Route tab on the Main Menu to create routes. You can create
routes two ways. The first way is to select waypoints from the Find
Menu, allowing you to see a list of the route points as you create the
route. The second way is by selecting waypoints or map items from
the Map Page, allowing you to see each route point graphically on-
screen as you create the route.
Route Tab with the Route List
To create a route using the Find menu:
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to highlight the Route tab.
3. Press MENU to open the Route options menu. Select New
Route, and press ENTER, or highlight the first available
blank route slot, and press ENTER. The Route Review Page
automatically opens, showing a blank route.
4. Press ENTER to find items to add to the route. The Find
menu opens.
5. Using the methods discussed in the “Finding an Item” section
beginning on page 16, select a point to add to your route.
When you find an item, highlight OK and press ENTER to
add the point to the route. Repeat until you have added all of
the points to the route.
Creating a new route on Route Review Page
GPSMAP 276C Owner’s Manual 19
BASIC OPERATION IN MARINE MODE > CREATING AND USING ROUTES
