You must change the Compass Page layout to use the Marine Timer.
To open the Marine Timer:
1. Press PAGE repeatedly until the Compass Page appears.
2. Press MENU.
3. Use the ROCKER to highlight Set Up Page Layout and
press ENTER.
4. Highlight 2 Columns With Timer, and press ENTER. The
Marine Timer appears in the lower right corner.
To use the Marine Timer:
1. Press the ROCKER up or down to select the time you want
to count. Five (5) minutes is the default.
2. Press ENTER to start the timer. Use the ROCKER during the
timing to quickly select a different length of time.
3. Press ENTER to stop timing.
Marine Timer on the Compass Page
As discussed previously, the timer is set to count down five minutes.
If you want to change the length of time and the behavior or the
timer, open the Timers Setup tab on the Main Menu.
NOTE: You can set the timer countdown for up to 60 minutes.
To set the Marine Timer:
1. Press MENU twice to open the Main Menu.
2. Press down on the ROCKER to select the Setup tab, and
then left to select the Timers sub tab.
3. Highlight Stop next to Marine to change the timer’s behavior.
4. Highlight the time field, press ENTER, and then use the
ROCKER to enter a new time.
GPSMAP 276C Owner’s Manual 49
MARINE MODE PAGES AND FEATURES > COMPASS PAGE
