A SERVICE OF

logo

Setting Up DSC
Use the Setup sub tab to turn DSC on and off. If you have more
than one chartplotter and only want DSC to display on another
chartplotter, turn DSC off on this unit.
This Setup sub tab also allows you to simulate Distress Calls and
Position Reports while the unit is in Simulator Mode (see page 11).
Simulating calls is helpful for practice before connecting to the real
system. The Distress Call simulator also helps to check if alarms are
working properly.
DSC Setup
Sonar Tab
The Sonar tab contains options for the Sonar Page. See the “Setting
Up and Using Sonar” section beginning on page 89 for more
information about Sonar setup options.
Main Menu—Sonar Tab
70 GPSMAP 276C Owner’s Manual
MAIN MENU > SONAR TAB