Calculation Method—sets how the unit searches for the route.
• Quickest Calculation—calculates the route the quickest, but
it might not produce the best route.
• Quick Calculation—takes a bit more time to calculate but
generates a better quality route.
• Better Route—generates an even better quality route but uses
a longer calculation time.
• Best Route—generates the most optimal route but takes the
longest time to calculate.
Calculate Routes for—sets route calculation for the particular
vehicle you are operating to optimize the route for your vehicle type,
as some roads have vehicle-based restrictions.
Avoid
—allows you to avoid certain road types and maneuvers on
your route. The unit uses these road types only if alternative routes
take you too far out of your way or if no other road is available.
Custom Avoids—allows you to enter specific areas and roads
that you would like to avoid in your navigation. See page 58 for
information on creating custom avoids.
Custom Road Prefs
—allows you to avoid or use Major, Medium,
and Minor roads using a slider scale. This is useful if you want to
avoid major highways, for example. Select Auto Set to use preset
values.
Guidance Sub Tab
Use the Guidance sub tab to set guidance information.
To access the Guidance sub tab
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to select the Setup tab, and then select
the Guidance sub tab.
Guidance Sub Tab
Off-Route Recalculation—allows you to set whether the unit
prompts you when it is recalculating your route (Prompted), or
recalculates automatically. Set whether the unit announces the
recalculation (Automatic - Announced) or recalculates silently
(Automatic - Silent). You can turn the off-route recalculation Off.
Next Turn Pop-up—turns the Next Turn pop-up window
Off, or
opens the window when you press NAV (Held NAV Key Only),
opens automatically (Automatically Only), or Both.
82 GPSMAP 276C Owner’s Manual
MAIN MENU > SETUP TAB
