CLI Commands B-51
■ Get Response PDUs - sum of SNMP Get-Response PDUs accepted and
processed
■ Trap PDUs - sum of SNMP Trap PDUs accepted and processed
OUTPUT COUNTERS
■ Packets - sum of SNMP packets transmitted
■ Too Big Errors - sum of SNMP PDUs generated by SNMP and for which the
value of the error-status field is `tooBig’
■ No Such Name Errors - sum of SNMP PDUs generated by SNMP and for
which the value of the error-status field is `noSuchName'
■ Bad Value Errors - sum of SNMP PDUs generated by SNMP and for which
the value of the error-status field is `badValue'
■ General Errors - sum of SNMP PDUs generated by SNMP and for which the
value of the error-status field is `genErr'
■ Get Request PDUs - sum of SNMP Get-Request PDUs sent from SNMP
■ Get Next Request PDUs - sum of SNMP Get-Next PDUs sent from SNMP
■ Set Request PDUs - sum of SNMP Set-Request PDUs sent from SNMP
■ Get Response PDUs - sum of SNMP Get-Response PDUs from SNMP
■ Trap PDUs - sum of SNMP Trap PDUs sent from SNMP
show snmp settings Displays SNMP settings, which you can modify using enable or disable snmp
authentication traps commands.
■ Authentication Traps - ENABLED (default) or DISABLED
show system Displays system information.
■ System Descriptor - for example:
3Com OfficeConnect™ Remote 812 V1.0.0, Built on Oct 31 1998 at
11:33:05.
■ Object ID - identifies this system to SNMP managers
■ System UpTime - time the system has been running since last boot
■ System Contact - modify using set system
■ System Name - modify using set system
■ System Location - modify using set system
■ System Services - for example, Internet End To End Applications
■ System Version - loaded version of the system software
show telnet Displays the status of the TELNET escape feature (ENABLED or DISABLED). It is set
using the disable and enable TELNET escape commands.
show tcp counters Displays system-wide TCP statistics.
