B-44 APPENDIX B: CLI COMMAND DESCRIPTION
■ Successfully Delivered - number of packets successfully received
OUTPUT COUNTERS
■ Total Output Datagrams - sum of datagrams transmitted
■ Discarded - number of datagrams discarded
■ Bad Routes - number of datagrams with a bad route
■ Fragments Needing Reassembly - # of fragmented datagrams
■ Datagrams Successfully Reassembled - # of broken datagrams
successfully reassembled
■ Reassembly Failures - # of broken datagrams unsuccessfully reassembled
■ Datagrams Successfully Fragmented - datagrams successfully broken
before transmission
■ Fragmentation Failures - failed datagram fragmentations before
transmission
■ Total Fragments - sum of fragments transmitted
show ip settings Displays system wide IP information.
■ IP Dynamic Address Pool Begin - start of IP address range
■ IP Dynamic Address Pool Size - size of IP address range
■ IP System Host Address - IP address of the system
■ IP Forwarding - ENABLE or DISABLE forwarding of IP packets
show ip network
<network_name>
settings
Displays parameter settings for the specified IP network. See the set ip network
command on page 29 for additional details.
■ Interface - interface this IP network runs on
■ Network Address - network address of this IP network
■ Frame Type - frame type used by the interface
■ Status - ENABLED, ACTIVE, INACTIVE, DISABLED
■ Reconfigure Needed - This is TRUE or FALSE.
■ Mask - subnet mask used by this IP network
■ Station - station address of this IP network
■ Broadcast Algorithm - broadcast algorithm used for this network
■ Max Reassembly Size - maximum packet size allowed to be reassembled
from fragments
■ IP Routing Protocol - routing protocol used
■ IP RIP Routing Policies - routing policies used by RIP
■ IP RIP Authentication Key - text string used for RIPv2 authentication
show ipx counters Displays counters for all IPX network activity.
