CLI Commands B-49
■ Local Endpoint Length - maximum length of the local Endpoint
Discriminator Address, default is 6
■ Local Endpoint ID - value of the local Endpoint Discriminator Address
■ Remote Endpoint Class - value of the remote Endpoint Discriminator
Class, which indicates the type of address being used as the identifier
■ Remote Endpoint Length - maximum length of the remote Endpoint
Discriminator Address
■ Remote Endpoint ID - value of the remote Endpoint Discriminator Address
SETTINGS for PPP BUNDLE 1 COMPRESSION
Operational Status - Opened or Not Opened
■ Compression Protocol - authentication protocol used by the local PPP
entity when it authenticated the local PPP entity to the remote PPP entity:
PAP, CHAP or NONE
SETTINGS for PPP LINK 1 - 5
■ Operational Status - opened or not opened
■ Interface Index - index number of the interface used
■ Local MRU - MRU the remote entity uses when sending packets to local
PPP entity. Default: 1514
■ Remote MRU - MRU the local entity uses when sending packets to remote
PPP entity, default is 1514
■ Local to Peer ACC Map - value of the ACC Map used for sending packets
from the local PPP entity to the remote PPP entity
■ Peer to Local ACC Map - ACC Map used by the remote PPP entity when
transmitting packets to the local PPP entity
■ Local To Remote Protocol Compression - Indicates whether the local PPP
entity will use Protocol Compression when sending packets to the remote
PPP entity. Default: ENABLED.
■ Remote To Local Protocol Compression - Indicates whether the remote
PPP entity will use Protocol Compression when transmitting packets to the
local PPP entity. Default: ENABLED.
■ Local To Remote ACC Compression - Indicates whether the local PPP
entity will use Address and Control Compression when sending packets to
the remote PPP entity. Default: ENABLED.
■ Remote To Local ACC Compression - Indicates whether the remote PPP
entity will use Address and Control Compression when sending packets to
the local PPP entity. Default: ENABLED.
SETTINGS for PPP LINK 1 - 5 AUTHENTICATION
■ Operational Status - not opened or opened
■ Local To Remote Compression Protocol - authentication protocol used
by the local PPP entity when it authenticated the itself to the remote PPP
entity, PAP is the default
