CLI Commands B-41
■ Total Response Sent - sum of DNS responses sent
■ Responses from Local Processing - number of DNS responses from local.
■ Responses from Remote Processing - number of DNS responses from
remote.
■ Success Responses - successful responses to DNS requests
■ Error Responses - sum of failures to DNS requests, specifics shown below
SPECIFIC ERROR COUNTERS
■ Format Errors - server said invalid request format
■ Problems with Name Server - internal server error
■ NonExistent Name - number of times requested name could not be
resolved
■ Server refused the request - server was able to accept a request
■ Server does not implement request - server was able to accept a request
■ Corrupted Responses - response did not decrypt
■ Timeouts - number of time outs waiting for the server to respond
■ Response could not be sent - the requester had terminated
show dns settings Displays settings for all DNS servers. You can modify using set DNS.
■ Administration Status - This controls whether the DNS server has
administration status. Options are Enabled or Disabled.
■ Number Retries per Server - number of times the resolve name request
will be sent to each Name Server, if the server fails to respond to a request
before the timeout period
■ Timeout Period in Seconds - number of seconds to wait before deciding a
request to a Name Server has timed out
show filter
<filter_name>
■ protocols [BR-ETH,BR-ETH-CALL,IP | IP-CALL, IP-RIP]
Displays the filter rules, based on the protocol options specified. The filter name
MUST be a filter file, as listed using list filters.
■ BR-ETH - Ethernet bridge data filter rules
■ BR-ETH - CALL - Ethernet bridge call filter rules
■ IP - IP data filter rules
■ IP-CALL - IP call filter rules
■ IP-RIP - IP RIP advertisement filter rules
show icmp counters Shows the Input and Output Counters for ICMP. Two types of ICMP messages -
error and query messages - are sent to syslog hosts.
ICMP COUNTERS
INPUT COUNTERS
