Yamaha YSP-5100BL Speaker System User Manual


 
40 En
OSD SETUP (OSD setup)
SET MENU DISPLAY MENU OSD SETUP
Use to adjust the display position and select the
background color of the OSD.
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
toward the – (minus) direction to raise the position of the
OSD, and adjust toward the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: ±0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
Choices: Blue*, Gray, Black, Purple, Red
LANGUAGE SETUP (Language setup)
SET MENU DISPLAY MENU LANGUAGE
SETUP
Use to select the language used in the OSD.
Choices: ENGLISH (English), DEUTSCH (German),
Français (French), ESPAÑOL (Spanish),
ITALIANO (Italian), NEDERLANDS (Dutch),
Русский (Russian)
Initial setting: ENGLISH (English)
UNIT SETUP (Unit Setup)
SET MENU DISPLAY MENU UNIT SETUP
Use this to change the display unit of measurement.
Choices: METERS, FEET*
Select METERS to enter distances in meters.
Select FEET to enter distances in feet.
Note
If you change this setting, the adjusted sound beam settings may
change.
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
1 Press CPower p key to set this unit to the
standby mode.
2 While holding down INPUT on the front
panel, press CPower p key on the remote
control.
Keep holding down INPUT until “ADVANCED
SETUP” appears on the front panel display.
3 Press ISETUP.
4 Press G / to select the desired menu
and then press GENTER.
y
To return to the previous screen, press IRETURN.
5 Press G / to select the desired
parameter.
6 Press CPower p key to set this unit to the
standby mode.
The new setting will be reflected when you turn on
this unit next time.
y
The initial settings are marked with “*”.
TURN ON VOLUME (Volume level at power-on)
Set the initial volume level when the power of this unit is
turned on.
Control range: OFF*, 01 to 99, MAX (Maximum)
MAX VOLUME SET (Maximum volume setting)
Set the maximum volume level so that this unit will not
output sound beyond the limited volume level.
Control range: 01 to 99, MAX* (Maximum)
PANEL INP.KEY (Front panel input key)
Select whether or not to enable the INPUT key on front
panel key. To disable the operations, select “P.INPUT:
OFF”.
Choices: P.INPUT: ON*, P.INPUT: OFF
F.PANEL KEY (Front panel key)
Select whether or not to enable front panel key operations
(except ADVANCED SETUP operations). To disable the
operations, select “F.PANEL: OFF”.
Choices: F.PANEL: ON*, F.PANEL: OFF
System configurations (ADVANCED SETUP)
INPUT VOLUME INTELLIBEAM MIC
INPUT
VOL
DEMOXMODE
Example (when “DEMO MODE” is selected)
CPower
EOFF
FSTEREO
FSURROUND
GENTER
G /
G /
IRETURN
ISETUP
0 +10
ENT
7 8 9
4 5 6
1 2 3
HDMI 4 iPod RADIO
ENTER
SURROUND STEREO
OFF
ENTER
TAINMENT
MUSIC
CINEMA DSP
MOVIE
HDMI 1 HDMI 2 HDMI 3
TV AUX 1 AUX 2
TV AV
MENUTOP MENU
OPTION
TV
MUTE
CODE SET
UNIVOLUME SUR. DECODE INTELLIBEAM
TV
INPUT MUTE
TV VOL CH VOLUME
SETUP RETURN
MEMORY
SLEEPINFO
TUNING PRESET CATEGORY
E
F
OPTION SETUP RETURN
I
ENTER
G
C