Yamaha YSP-5100BL Speaker System User Manual


 
28 En
Category Search mode
1 Press PCATEGORY / repeatedly to
select the channel category.
The CATEGORY indicator lights up on the front
panel display during channel category selection.
When you select the category, the first channel in the
category is selected.
y
If you do not operate within 10 seconds, the Category
Search mode is automatically canceled.
2 While the CATEGORY indicator lights up,
press PTUNING / repeatedly to search
for a channel within the selected channel
category.
y
You can search for a channel quickly by pressing and
holding PTUNING / .
Note
This unit skips the channels when this unit is in the All
Channel Search mode or Category Search mode in the
following cases (it is not malfunction of this unit):
the channel is locked (page 29).
the channel is out of service.
you do not subscribe to the channel.
Direct number access
In the All Channel Search mode or Category
search mode, press the NNumeric keys to enter
the desired three-digit channel number.
For example, to enter the number 123, press the
NNumeric keys as “1”, “2” and “3”.
y
To display the Sirius ID number displayed on the front panel
display, select channel “0”.
To enter a one-digit or two-digit channel number, press the
NNumeric keys on the remote control and then press NENT to
confirm the input number.
Instead of pressing NENT to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
If no key is pressed within a few seconds after you enter a one-
digit or two-digit number, this unit automatically confirms the
entered channel number.
If the selected channel is locked, “PIN:___” appears on the
front panel display. Enter the four-digit Parental Lock code
number by using the NNumeric keys or press NENT to cancel
(page 29).
If the selected channel is not available, an advisory message
may appear. For details, see “SIRIUS Satellite Radio” (page 44)
in “Troubleshooting”.
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels. You can then recall any preset channel
easily by selecting the preset channel number as described
in “Calling a preset channel (Preset Search mode)” on this
page.
Registering preset channels
1 Search a channel you want to set as a preset
channel in one of the SIRIUS Satellite Radio
search modes.
For details, see “SIRIUS Satellite Radio operations”
(page 27).
2 Press PMEMORY.
The MEMORY indicator lights up on the front panel
display.
y
By holding down PMEMORY for more than 2 seconds,
you can skip the following steps and automatically register
the selected channel to an empty preset number (next to
the lastly-registered preset number).
To cancel the preset operation, press IRETURN.
3 Press PPRESET / to select a preset
number to which the selected channel is
registered.
y
You can also select a preset number using the NNumeric
keys.
If you select a preset number being used (currently
registered channel number appears next to the preset
number), the current preset channel will be overwritten.
4 Press PMEMORY.
Calling a preset channel (Preset Search
mode)
Prior to selecting a preset channel in the Preset Search
mode, you must preset SIRIUS channels. For details, see
“Registering preset channels” on this page.
Press PPRESET / repeatedly to change the
preset channel number (1 to 40).
CATEGORY
SIRIUS
POP
Light up
Category name
Registering SIRIUS Satellite
Radio™ channels
SIRIUS
001
Hit
1
MEMORY
SIRIUS
P01:---
<<
001
Light up
Preset number Channel number
Currently registered channel number
(or “– – –” if empty)
SIRIUS
P01
Hit
1
GENTER
G /
G /
IOPTION
IRETURN
NNumeric keys
NENT
PCATEGORY /
PMEMORY
PPRESET /
PTUNING /
0 +10
ENT
7 8 9
4 5 6
1 2 3
HDMI 4 iPod RADIO
ENTER
SURROUND STEREO
OFF
ENTER
TAINMENT
MUSIC
CINEMA DSP
MOVIE
HDMI 1 HDMI 2 HDMI 3
TV AUX 1 AUX 2
TV AV
MENUTOP MENU
OPTION
TV
MUTE
CODE SET
UNIVOLUME SUR. DECODE INTELLIBEAM
TV
INPUT MUTE
TV VOL CH VOLUME
SETUP RETURN
MEMORY
SLEEPINFO
TUNING PRESET CATEGORY
0 +10
ENT
7 8 9
4 5 6
1 2 3
N
MEMORY
P
OPTION SETUP RETURN
I
ENTER
G