Filter
Top Products
43
SET MENU
ADVANCED
OPERATION
■ Memory guard B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
When “MEMORY GUARD” is set to ON, you cannot use the test
tone or select any other SET MENU items.
■ Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters for each sound
field
program within a sound field program group. When
you initialize a sound
field program group, all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound
field
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when “MEMORY
GUARD” is set to ON.
■ Tuner set D)TUNER SET
Use this feature to adjust the frequency spacing for the
tuner. The new setting becomes active the next time the
power is turned on.
Choices: AM: 9kHz, FM: 50kHz and
AM: 10kHz, FM: 100kHz
• Select AM: 9kHz, FM: 50kHz to set the AM band to
9kHz and the FM band to 50kHz.
• Select AM: 10kHz, FM: 100kHz to set the AM band to
10kHz and the FM band to 100kHz.
This feature is only available when using Asia and General
models.
■ Scart set D)SCART SET
Use this feature to select whether you want signals carried
via SCART connections to pass through this unit when it
is set to the standby mode.
Choices: ON, OFF
• Select ON if you want to allow signals to pass through
this unit when it is in standby mode. (For example, if
this unit is connected via its SCART connectors
between your TV and VCR, the TV signals can pass
through to the VCR even when this unit is in the
standby mode.)
• Select OFF if you do not want signals to pass through
this unit when it is in standby mode.
This feature is only available when using Europe and U.K.
models.
Note
Notes
)OFFON
[<]/[>]:Select
[ENTER]:Return
B)MEMORY
GUARD
1234
567*8
9
C)PARAM.
INI
Note
Note
STEPAM9/FM50
[<]/[>]:Select
[ENTER]:Return
D)TUNER SET
STEPAM10/FM100
[<]/[>]:Select
[ENTER]:Return
D)TUNER SET
STANDBY ON
[<]/[>]:Select
[ENTER]:Return
D)SCART SET
STANDBY OFF
[<]/[>]:Select
[ENTER]:Return
D)SCART SET