Filter
Top Products
TUNING
22
There are 2 tuning methods; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
■ Automatic tuning
1 Press INPUT, then rotate VOLUME/SELECT
within 5 seconds to select TUNER.
If no operation is performed within 5 seconds of pressing INPUT
or VOLUME/SELECT is pressed on the front panel, the function
of VOLUME/SELECT switches back to volume level adjustment.
If this happens, “VOLUME” appears in the front panel display for
a few seconds.
2 Press INPUT repeatedly on the front panel to
select the reception band you want to tune.
“FM” or “AM” and the current frequency appear in
the front panel display.
3 Hold down TUNER (AUTO/MAN’L) for more
than 1 second so that the “AUTO” indicator
lights up in the front panel display.
If “AUTO” is already lit up in the front panel display,
you do not need to perform this step. In this case, skip
to step 4.
4 Press TUNER (AUTO/MAN’L), then rotate
VOLUME/SELECT within 5 seconds to begin
automatic tuning.
Rotate rightward to tune to a higher frequency, or
rotate leftward to tune to a lower frequency.
When tuned into a station, the “TUNED” indicator lights up and
the frequency of the received station is shown in the front panel
display.
TUNING
Automatic and manual tuning
Note
INPUT
VOLUME/SELECT
DSPTUNER
AUTO/MA N'L
PUSH-ENTER
STANDBY
/ON
SILENT CINEMA VIDEO AUDIO
VIDEO 2
PHONES
OPTICALL R
1,4
1,2
3,4
VOLUME/SELECT
INPUT
INPUT
VCR
TUNED
AUTO
VOLUME
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
VCR
AUTO
VOLUME
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
VCR
AUTO
VOLUME
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Note
TUNER
AUTO/MAN'L
VCR
AUTO
VOLUME
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Lights
TUNER
AUTO/MAN'L
VOLUME/SELECT