Filter
Top Products
ADVANCED OPERATIONS
31
ADVANCED
OPERATION
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source.
■ Setting the sleep timer
1 Select a source and start playback on the
source component.
2 Press SLEEP repeatedly on the
remote control to set the
amount of time.
Each time you press SLEEP, the front
panel display changes as shown below. The SLEEP
indicator flashes while switching the amount of time
for the sleep timer.
The “SLEEP” indicator lights up in the front panel
display after the sleep timer has been set.
■ Canceling the sleep timer
Press SLEEP repeatedly on the remote control until
“SLEEP OFF” appears in the front panel display.
After a few seconds, “SLEEP OFF” disappears, and the
“SLEEP” indicator goes off.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.
■ Playing Dolby Digital Surround EX or
DTS-ES material
Press EXTD SUR. to turn on the Dolby Digital + Matrix
6.1 or DTS + Matrix 6.1 decoder.
The display changes AUTO → EXTD SUR.:ON → OFF
each time EXTD SUR. is pressed.
AUTO: Automatically switches Dolby Digital
+ Matrix 6.1 and DTS + Matrix 6.1
depending on the signal. Virtual
surround back speaker does not work
for 5.1- channel sources.
EXTD SUR.:ON: Produces 6-channel playback of the
input source using the Matrix 6.1
decoder. The virtual surround back
speaker can be used when playing a
5.1- channel source.
OFF: Virtual surround back speaker does
not work.
• Some 6.1-channel compatible discs do not have a signal (flag)
that this unit can automatically detect. Select “Matrix 6.1” to
play these kinds of discs with 6.1-channel sound.
• 6.1-channel playback is not possible even if you press EXTD
SUR. in the following cases:
– When effects are turned off.
– When the unit is reproducing a Dolby Digital KARAOKE
source.
– When headphones are connected to the PHONES jack.
• The decoding mode resets to AUTO when you turn the power of
the unit off.
ADVANCED OPERATIONS
Using the sleep timer
1
STEREO
2
HALL
3
JAZZ
4
ROCK
SLEEP
STANDBY/ON
5
MUSIC
6
ENTERTAIN
7
TV THTR
8
MOVIE
9
STANDARD
0
NIGHT
+10
EXTD SUR.
ENT
STRAIGHT
EFFECT
2
SLEEP
SLEEP 120min. SLEEP 90min.
SLEEP 60min.SLEEP 30min.SLEEP OFF
VCR
TUNED
VOLUME
SLEEP
L
L R
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Lights
SLEEP
Enjoying multi-channel software
Notes
+10
EXTD SUR.
VCR
VOLUME
MATRIX
LFE
L
LR
SL SR
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Remote control