Filter
Top Products
35
ADVANCED OPERATIONS
ADVANCED
OPERATION
You can adjust the output level of each speaker while
listening to a music source. Please note that this operation
will override the level adjustments made in the Speaker
Level section of BASIC SETUP (see page 17) and “Using
the test tone” (page 35).
1 Press AMP to select the AMP mode.
2 Press LEVEL repeatedly to select the
speaker you want to adjust.
FRONT L Front left speaker level
CENTER Center speaker level
FRONT R Front right speaker level
SUR.R Surround right speaker level
SUR.L Surround left speaker level
SWFR Subwoofer level
y
Once you press LEVEL, you can also select the speaker by
pressing / on the remote control.
3 Press / to adjust the speaker output level
(Control range: –10 to +10 dB).
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in the Speaker Level section of
BASIC SETUP (page 17). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
1 Press TEST/RETURN on the
remote control.
The unit will output a test tone.
2 Press / repeatedly on the remote
control to select the speaker you want to
adjust.
TEST LEFT Front left speaker
TEST CENTER Center speaker
TEST RIGHT Front right speaker
TEST SUR. R Surround right speaker
TEST SUR. L Surround left speaker
TEST SUBWOOFER Subwoofer
3 Press / to adjust speaker volumes.
4 Press TEST/RETURN when you have
completed your adjustment.
The test tone stops.
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
Manually adjusting speaker levels
AMP
Remote control
TITLE
LEVEL
Remote control
ENTER
Using the test tone
Note
b
TITLE
LEVEL
ENTER
CH
–
CH
+
p
MUTE
TV VOL VOLUME
AMP
VCRDVD/CD VIDEO 1
TUNERDTV/CBL VIDEO 2
a
MUTE INPUT
–
CH
TV MODE
+
MENU
SET MENU
RETURN
TEST/
RETURN
DISPLAY
1,4
2,3
RETURN
TEST/
RETURN