Filter
Top Products
20
PLAYBACK
■ Remote control operation
Press AMP to select the AMP mode, then press
one of the sound field program buttons
repeatedly to select the desired program.
The name of the selected program appears in the front
panel display.
■ Front panel operation
Press DSP, then rotate VOLUME/SELECT within
5 seconds.
The name of the selected program appears in the front
panel display.
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
• If no operation is performed within 5 seconds of pressing DSP
on the front panel, the function of VOLUME/SELECT switches
back to volume.
• After selecting a DSP program, press VOLUME/SELECT to
switch the function of VOLUME/SELECT back to “volume”.
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal format
and not all sub-programs can be used with all input signal
formats.
• The acoustics of your listening room affect the sound field
program. Minimize the sound reflections in your room to
maximize the effect created by the program.
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the CINEMA DSP sound field
programs automatically switches to the appropriate decoding
program.
• When the unit is reproducing a monaural source with PRO
LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Game or PRO
LOGIC II Movie, no sound is output from the front and
surround speakers. Sound can only be heard from the center
speaker. (If CENTER SP in SPEAKER SET in the SOUND
menu is set to “None”, the center channel sound is output from
the front speakers.)
• Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
Selecting sound field programs
1
STEREO
2
HALL
3
JAZZ
4
ROCK
SLEEP
STANDBY/ON
5
MUSIC
6
ENTERTAIN
7
TV THTR
8
MOVIE
9
TV AV
CODE SET
REC FREQ/RDS EON
s AUDIO
w
DISC SKIP MODE START
PTY SEEK
e f
b
A/B/C/D/E
TITLE
LEVEL
ENTER
CH
–
CH
+
p
d PRESET
a
u
STANDARD
0
NIGHT
+10
EXTD SUR.
ENT
STRAIGHT
EFFECT
MENU
SET MENU
RETURN DISPLAY
b
TITLE
LEVEL
ENTER
CH
–
CH
+
p
MUTE
TV VOL VOLUME
AMP
VCRDVD/CD VIDEO 1
TUNERDTV/CBL VIDEO 2
a
MUTE INPUT
–
CH
TV MODE
+
MENU
SET MENU
RETURN
TEST/
RETURN
DISPLAY
AMP
Sound field
program
buttons
VCR
VOLUME
L
L R
HiFi DSP
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
1
STEREO
2
HALL
3
JAZZ
4
ROCK
5
MUSIC
6
ENTERTAIN
7
TV THTR
8
MOVIE
9
STANDARD
Program name
AMP
Notes
INPUT
VOLUME/SELECT
DSPTUNER
AUTO/MAN'L
PUSH-ENTER
STANDBY
/ON
SILENT CINEMA VIDEO AUDIO
VIDEO 2
PHONES
OPTICALL R
VOLUME/SELECT
DSP
VCR
VOLUME
L
L R
HiFi DSP
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Program name
VOLUME/SELECT
DSP